Set of Lamp Housing with SMA 905 Adaptor, Mercury Pencil Lamp, and Power supply

Description

Brand-new Light-Tight Pencil Lamp Housing with one SMA 905 Fiber Connector + [Used] Hg Pencil Lamp + Power Supply SCT 1
What are included in the default configuration:
(1) SMA 905 adaptors  (no focusing/collimating)                                      [Quantity=1]
* Switch SMA to FC/PC adaptor is free of charge upon email request.
(2) Light-tight lamp housing (for pen ray lamp up to OD 0.4")                  [Quantity=1]
(3) A wrench for the 4-40 screw adjustment of adaptor or collimator        [Quantity=1]
(4) [Used] Pencil lamp (Mercury - Hg)                                                       [
Quantity=1]
(5) [Used] USA plug power supply UVP SCT 1
[
Quantity=1]
(6)
Optional
:
Customization up to a total of three fiber access ports: SMA 905, FC/PC, or any combination. Only available via email request.
Versatile f
eatures include
(1) Bottom: Diameter 1.5"x1/4" Plate with two 4-40 threaded mounting holes, two slots for 4-40 screws, one 8-32 threaded hole (with set screw installed as default).
(2) Side: Two 8-32 threaded holes (with one set screw or a
black Nylon thumb screw
installed as default configuration).
(3) Side: Allow up to three SMA 905 adaptors, collimators, or focusing lens
(a) One in 1/4"-36 threaded hole.
(b) Two in 3/8"-24 threaded mounts.
(4) Top:  Pencil lamp port (up to 0.4" diameter), with one recess to allow O-ring sealing (up to 22 mm dia.).
(5) Dimensions: Dia. 1.5"x 0.25" for the bottom plate, 1.00"x1.00"x2.75" for the lamp housing.
The lamp housing can be used with pencil lamps from multiple vendors (e.g., UVP/Jena, Hamamatsu, Newport) for spectrometer applications.
Educational discount
- please use your school/academic email address to request.
Other shipping options may be
available upon request.
The SMA 905 and FC/PC connectors are fully compatible and interchangeable with our UV-NIR adjustable fiber collimator!
The collimators are adjusted for best collimating effect at 200-2200 nm. Aligned with Xenon lamp and UV fused silica fiber cable. They are
not
included in this package.
You may choose up to four collimators/focusing lens to use with this cuvette/sample housing by contacting us.
Technical data for the collimator:
Model: P3S-SMA905-Col050PX
Batch:  PQA017-0708-01PX
Lens Diameter (mm):  5.0
Clear Aperture (mm) : 3.8
Focal Length (mm):     8.3
Numerical Aperture:    0.23
Lens Material:           Fused Silica
Wavelength range:    200-2000nm (best alignment range)
Fiber connection:      SMA 905 (UNS 1/4”-36), Stainless Steel connector
Housing Material:        Aluminum(anodize) and Stainless Steel
Thread and interface:  Dual interfaces (UNF 3/8"-24, and Smooth Dia. 1/2")
Temperature (°C):      -30 to 150 °C
(contact us for wider temperature ranges)